Shop headings: New Spares | Used Spares | Accessories | Brands
Crush washer with various uses including fuel system and oil pump depending on model
More than 5 in stock
18161150 GU18161150 18 16 11 50
1816 1150 1816.1150 18.16.11.50
£1.20
INC VAT
£1.00 EX VAT
Premium softstyle grey T-shirt printed with classic Moto Guzzi logo in white on the chest.
Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!
Sizing:
More than 5 in stock
£18.00
INC VAT
£15.00 EX VAT
Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£31.50
INC VAT
£26.25 EX VAT
Caliper mounting shim, used to precisely centre caliper over brake disc
More than 5 in stock
95100332 GU95100332 95 10 03 32
9510 0332 9510.0332 95.10.03.32
£1.20
INC VAT
£1.00 EX VAT
New type clutch friction plate for models with deep splines with deep splined centre
2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)
These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510
More than 5 in stock
05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30
£57.70
INC VAT
£48.08 EX VAT
Valve guide circlip, one required per guide.
More than 5 in stock
90353016 GU90353016 90 35 30 16
9035 3016 9035.3016 90.35.30.16
£1.20
INC VAT
£1.00 EX VAT
Heavy duty stainless steel exhaust silencer clamp replaces Guzzi ref. 29123450, 03123400
More than 5 in stock
14123400 GU14123400 14 12 34 00
1412 3400 1412.3400 14.12.34.00
£9.10
INC VAT
£7.58 EX VAT
Rubber grommet used for various applications
More than 5 in stock
91551010 GU91551010 91 55 10 10
9155 1010 9155.1010 91.55.10.10
£2.20
INC VAT
£1.83 EX VAT
Inlet rubber with HT lead guide
Fits between exhaust manifold on cylinder head and carb. Use hose clip SSA45970. Suitable for PHF30 and PHF36 carbs
More than 5 in stock
14114350-z 14114350 GU14114350 14 11 43 50
1411 4350 1411.4350 14.11.43.50
£13.00
INC VAT
£10.83 EX VAT
Carb gasket kit / rebuild kit for 1 Dellorto PHF carb. Suitable for all PHF carbs with accelerator pumps including PHF36. Dellorto ref. 52514-77
Carb overhaul kit, float bowl seal FUA90001 and fuel filter FUA60888 also available separately to this carb seal kit
More than 5 in stock
14939950 GU14939950 14 93 99 50
1493 9950 1493.9950 14.93.99.50
Also fits Hesketh, Laverda
£18.75
INC VAT
£15.62 EX VAT